LG lrg30355 Istruzione Sull'Installazione
2
I N S TA L L AT I O N I N S T RU C T I O N S
READ ALL INSTRUCTIONS BEFORE INSTALLATION
• This product must be installed by a licensed
plumber or gas fitter.
• When using ball type gas shut-off valves, they
shall be the T-handle type.
• A flexible gas connector, when used, must not
exceed 3 feet in length.
IN THE COMMONWEALTH OF MASSACHUSETTS
Do not store or use combustible
materials, gasoline or other flammable
vapors and liquids in the vicinity of this
or any other appliance.
If you smell gas:
1. Open windows.
2. Don’t touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas supplier from a
1. Open windows.
2. Don’t touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas supplier from a
neighbor’s home or from a cell phone outside
of the home.
of the home.
FOR YOUR SAFETY
PREPARING FOR INSTALLATION
TOOLS YOU WILL NEED
MATERIALS YOU MAY NEED
• Gas line shut-off valve
• Pipe joint sealant or UL-approved pipe thread
tape with Teflon* that resists action of natural
and LP gases
and LP gases
• Flexible metal appliance connector (1/2
″ I.D.)
A 5-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing a
new range.
installation but other lengths are acceptable.
Never use an old connector when installing a
new range.
• Flare union adapter for connection to gas
supply line (3/4
″ or 1/2″ NPT x 1/2″ I.D.)
• Flare union adapter for connection to pressure
regulator on range (1/2
″ NPT x 1/2″ I.D.)
• Liquid leak detector or soapy water.
• Lag bolt or 1/2
″ O.D. sleeve anchor (for
concrete floors only).
* Teflon: Registered trademark of DuPont