Equator pls600v Informazioni Sulla Garanzia
EQUATOR
ADVANCED Appliances
Service Manual :
COMPACT DISHWASHER – PLS 600 / 602 SERIES
Page 4
TROUBLESHOOTING
CAUSE
SOLUTION
1.
THE APPLIANCE DOES NOT GET WATER :-
a. There is no water supply
Check the water supply network.
b. The pressure of the supplied
water is
too low.
Check the water pressure
(must be 2 bar)
(must be 2 bar)
c. The water supply hose is bent
Check and stretch the hose.
d. The filter of the water supply
hose is choked.
Clean the filter: For the model SUPER
AUTOMATIC, remove the back cover of
the appliance, remove the supply hose and
clean the filter. Fix the hose properly and
start a washing program (without dishes and
detergent inside) in order to check if the
appliance get water and if the fixing of the
hose is proper without any leakage. By the
end of program, fix the cover on the
appliance. For the models of PLS-Series, act
as above but without removing the back
cover. (On these appliances the supply hose
is fixed outside).
e. REPAIR requirement.
Possible malfunction:
a. Faulty water supply electrovalve
b. Faulty Pressostat
2.
SMOKE APPEARANCE AND SMELLING OF BURNED RUBBER :-
a. The appliance did not get water
Let appliance cool down for a couple of
hours. Check the water pressure and
water supply hose for bending. Start new
washing program from the beginning. In
case that the problem insists, see 1d.