Toshiba 3000 Guida Utente
47
Getting Started
Setting up your computer
5.375 x 8.375 ver 2.3
7
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
connector bar faces the slot, fit the module into the
socket.
8
Gently press down on the memory module connector
until the clips snap into place.
until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
module should be level when secured in place.
Inserting the memory module
CAUTION: Avoid touching the connectors on the memory module
or on the computer. Grease or dust on the connectors may cause
memory access problems.
or on the computer. Grease or dust on the connectors may cause
memory access problems.
9
Replace the expansion memory slot cover.
10
Replace the screws and tighten them.
11
Turn the computer over and reconnect any cables you
removed.
removed.
To verify that the computer correctly recognizes the
memory, click Start, Control Panel and click
Performance and Maintenance. Click System to view
the recognized memory.
memory, click Start, Control Panel and click
Performance and Maintenance. Click System to view
the recognized memory.
12
If the computer does not recognize the memory, shut
down the computer, remove the memory slot cover, and
make sure the memory module is seated properly, as
described in step 8.
down the computer, remove the memory slot cover, and
make sure the memory module is seated properly, as
described in step 8.