Toshiba 3000 Guida Utente
144
Exploring Your Options
Using the Ethernet LAN Port
5.375 x 8.375 ver 2.3
6
Make a note of the COM port number.
7
To verify that the modem is set up properly, double-click
the COM port to which your modem is connected.
the COM port to which your modem is connected.
The Modem AMR Properties box appears.
8
In the device status area, the computer should indicate
whether the modem is working properly.
whether the modem is working properly.
9
If the modem isn’t working properly, click
Troubleshooting and follow the instructions.
Troubleshooting and follow the instructions.
10
Click OK to close the properties box, then the Phone and
Modem options box.
Modem options box.
11
Close the Control Panel.
Connecting the modem to a telephone line
Before you can use the modem, you must connect it to a
standard voice-grade telephone line.
standard voice-grade telephone line.
TECHNICAL NOTE: If you are using the telephone line at home,
disable Call Waiting before you connect through the modem. Call
Waiting interrupts data transmission.
disable Call Waiting before you connect through the modem. Call
Waiting interrupts data transmission.
Using the Ethernet LAN Port
If your operating system is Windows
®
XP Professional, you
can connect your computer to a Local Area Network (LAN)
at work or from a remote location.
at work or from a remote location.
When your computer starts, the Windows
®
operating system
attempts to contact a Dynamic Host Configuration Protocol
(DHCP) server. If the computer is not connected to a
network, it may pause a few minutes as it waits for a reply. To
avoid this delay, you can configure the Windows
(DHCP) server. If the computer is not connected to a
network, it may pause a few minutes as it waits for a reply. To
avoid this delay, you can configure the Windows
®
operating
system to disable the LAN port.
To disable the LAN port: