Toshiba M30 Guida Utente
HW Setup
Satellite M30 Series
7-2
Satellite M30 Series
Version
1
Last Saved on 10.09.2003 09:47
ENGLISH using Mies10 Online.dot –– Printed on 10.09.2003 as
General
This window displays the BIOS version and contains two buttons:
Default and About.
Default and About.
Setup
This field displays
BIOS Version
and date.
Default
Click Default
to return all HW Setup values to the factory settings.
About
Click About
to display the HW Setup version.
Parallel/Printer
This tab lets you set the Parallel Port Mode. Use the Windows Device
Manager to make settings for the Parallel port.
Manager to make settings for the Parallel port.
Parallel Port Mode
The options in this tab are
ECP
and
Standard Bi-directional
.
ECP
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to
(ECP). For most printers, the port should be set
to
ECP
. (Default)
Standard
Bi-directional
Bi-directional
This setting should be used with some other
parallel devices.
parallel devices.
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Otherwise, it selects the internal LCD. (Default)
LCD + Analog RGB
Selects both the internal LCD and external
monitor for simultaneous display.
monitor for simultaneous display.