Toshiba M300 Guida Utente

70

❖

Enable/Disable the HDMI-CEC function on the computer.

For more detailed HDMI-CEC information, visit 

Once you have connected an external display device, you can 
choose to use the internal display only, the external device only, or 
both simultaneously. 

Some modes are only available with the appropriate device attached 
and turned on.

The quickest way to change the display output settings is to use the 
display hot key (

Fn

 + 

F5

):

While holding down 

Fn

, press 

F5

 repeatedly, pausing between 

each press, until the setting you want takes effect.

This hot key cycles through the settings in the following order:

❖

Built-in display only

❖

Built-in display and external monitor simultaneously

❖

External monitor only

❖

Built-in display and TV (or other external video device) 
simultaneously

❖

TV (or other external video device) only

❖

Built-in display and external monitor (extended desktop)

❖

Built-in display and TV (extended desktop)

❖

Swap-Switch primary display between internal display 
and external monitor when using extended desktop

NOTE