Toshiba P100-ST9012 Guida Utente
94
Learning the Basics
Using the Optical Drive
Manual eject hole—Use if you need to release the disc tray
when the power is off. Use a straightened paper clip or other
narrow object to press the manual eject button located inside
the hole.
when the power is off. Use a straightened paper clip or other
narrow object to press the manual eject button located inside
the hole.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
lead can break off inside the computer and damage it.
Inserting a compact disc
To insert a compact disc into the drive:
1
Make sure the computer is turned on.
2
Make sure the in-use indicator light is off.
3
Press the drive’s eject button.
The disc tray slides partially out of the drive (about 1
inch).
inch).
HINT: The drive will not open if the computer’s power is off.
4
Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
5
Hold the disc by its edges and check that it is free of dust.