Toshiba 32C120U Manuale Utente

51

To save the setting, highlight Done, and then press the ENTER 
button.

Because the PC and HDMI1 inputs share the same set of analog 
audio inputs, the PC Audio menu setting influences the HDMI 1 
Audio menu setting. If PC Audio is set to “No” the HDMI 1 Audio 
setting changes to “Auto.” If PC Audio is set to “Yes” the HDMI 1 
Audio setting is set to “Digital” and is grayed out in the menu. See 

.

You can view the digital signal meter in the ANT/ CABLE digital 
TV input source only.

To view the digital signal meter:

Press the MENU button to open the Setup menu.

Highlight Installation, and then press the ENTER button.

A new set of Installation menu icons appears. 

Open the Terrestrial menu, highlight Signal Meter, and then 
press the ENTER button.

Press the ( / / /  arrow) buttons to select the antenna input 
and digital channel signal you wish to check.

❖

The physical digital channel number listed in the Signal Meter 
screen may not correspond to a virtual TV channel number. 
Contact your local broadcasters to obtain the RF channel 
numbers for your local digital stations.

❖

The signal strength does not change between virtual channels on 
the same physical channel.

Auto

When viewing the HDMI 1 input, if digital audio from the HDMI

®

 

input is available, it will be output. If not, the TV will automatically 
detect and output analog audio from the PC Audio input.

Digital

When viewing the HDMI 1 input, digital audio from the HDMI

®

 

input will be output.

Analog

When viewing the HDMI 1 input, analog audio from the PC Audio 
input will be output.