Mitsubishi 120u Manuale Utente

- 17 -

To move the red to the right and
the blue to the left.

To adjust the purity condition on the top-left corner.

To eliminate an excessive green or white-back ground that may
occur when both Sync-On-Green and external sync signals are
applied to the monitor.

To select 1.0V of video input.

To select 0.7V of video input.

To clamp the video signal at
the front of the H-Sync pulse.

To clamp the video signal at
the back of the H-Sync pulse.
If you connect to Macintosh,
press plus buton.

To move the red to the left and
the blue to the right.

To move the red to the upper and
the blue to the lower.

To move the red to the lower and
the blue to the upper.

To select the Moire Cancel mode
off.

To select the Moire Cancel mode
on.

To eliminate possible color shad-
ing or impurity.

To select the constant power
consumption mode.

To select the power-save mode.

To unlock the OSD function.

To lock the OSD function except for
"BRIGHT" and "CONTRAST".

To move the OSD screen
position to the left.

To move the OSD screen
position to the right.

It shows the current scanning frequency and Preset No.

To choose the language used on OSD.

ENG......English,

FRA......French,

ESP......Spanish,

ITA......Italian,

GER......German,

JPN......Japanese

CONTROL LOCK:  This is to lock the OSD function to keep the OSD screen image you set.
Press plus button to lock the OSD function.  You can adjust only "BRIGHT" and "CONTRAST" at the condition.
Press minus button to unlock the locked condition.

GTF:  This function is available when the computer has the GTF

TM

 function according to the VESA

®

GTF

TM

 standard.

To adjust the purity condition on the top-right corner.

To adjust the purity condition on the bottom-left corner.

To adjust the purity condition on the bottom-right corner.

To restore to factory preset level.

To select "SHARP" mode.

To move the red to the upper and
the blue to the lower of top screen.

To move the red to the lower and
the blue to the upper of top screen.

To move the red to the upper and the
blue to the lower on the bottom screen.

To move the red to the lower and the
blue to the upper on the bottom screen.

To decrease the level of the moire-clear wave.

To restore all items to the factory
preset.

To adjust screen size, position and
distortions automatically.

To select "SMOOTH" mode.

GEOMETRY RESET

TEXT MODE

H-CONVERGENCE

V-CONVERGENCE

V-CONVERGENCE-TOP

V-CONVERGENCE-BOTTOM

CORNER PURITY(TL)

CORNER PURITY(TR)

CORNER PURITY(BL)

CORNER PURITY(BR)

MOIRE CANCEL

MOIRE CANCEL LEVEL

CLAMP PULSE POSITION

VIDEO LEVEL

DEGAUSS

POWER SAVE

CONTROL LOCK

OSD POSITION

ALL RESET

GTF AUTO ADJUST

DIAGNOSIS

LANGUAGE

Press the Minus Button

Press the Plus Button