ASKProxima impression 880 Guida Utente

USER GUIDE

SVGA LCD MULTIMEDIA PROJECTOR

30

POSITION. Due to variations in graphic cards, the horizontal and vertical
position may need adjustment. Select POSITION, then press LEFT and
use trackball. A general information box is shown in the lower left corner.
VGA text mode (720 x 400) is correctly displayed when the image is
positioned correctly. (VGA text mode can also be viewed full screen when
SCALE is selected.

REAR inverts the image for use in rear projection arrangements i.e.
projection from the back of a screen. The feature is switched on or off by
selecting it from the menu.

CEILING switches between an upright and an upside-down projection by
flipping the image vertically.

FACTORY RESET. This function resumes factory settings of all
parameters. You will be promted if you want to erase all settings.

These selections are only applicable for video sources.

TINT controls the hue of an image, and is only active in NTSC-video.

SHARPNESS controls the sharpness of the lines in an image, and is only
active for video sources.

COLOR adjusts color saturation. Only applicable when video is connected.

GAMMA toggles the gamma correction on and off for video sources.
Gamma correction helps improve detail in low light situations, like indoors
scenes etc. Only active for video sources.

TREBLE controls the higher sound range.

BASS controls the lower sound range .

BALANCE controls the sound balance between the two stereo speakers.

MONO is selected if  the audio source is not stereo, in order to get sound
in both speakers. If mono is not selected, there will be sound in the left
speaker only.