Atlas Sound dls4 Guida Specifiche

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119  U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

©2009 

Atlas 

Sound 

L.P

. All 

rights 

reserved. 

Atlas 

Sound 

and 

Strategy 

Series 

are 

trademarks 

of 

Atlas 

Sound 

L.P

.  

All 

other 

trademarks 

are 

the 

property 

of 

their 

respective 

owners. 

 A

TS003681 

RevA 

11/09

•   Small Footprint and Press-Fit Grilles Give Discrete Installed

Appearance

•   Tap Selector Switch Located Behind Speaker Magnet with Shaft

Through Center of Cone. Selector Knob Doubles as a Dispersion
Cone and Allows Tap Selection to be Done After the Speaker is
Installed in the Ceiling

•   8 Watt, High Efficiency Internal Transformer (May Be Bypassed by

Tap Selector Switch for 8Ω Operation)

•   Works in Most New or Retro-Fit Ceiling Application with Atlas Sound

Hardware

•   UL1480 for General Signaling and are Certified for Use in Air Handling

Spaces Under UL2043

Power Rating 

16 Watts at 8Ω

Frequency Response 

150Hz – 17kHz (±5dB)

Sensitivity (1W/1M) 

92dB

Dispersion 

105°

Woofer 

4" Paper Cone

Woofer Magnet Weight 

10oz (283g)

Bezel Diameter 

7.75" (197mm)

Depth 

4.25" (108mm)

Cut-Out Diameter 

6.25" (159mm)

Weight 

3lbs 5oz (1.5kg)

The DLS4 was specially designed for optimum use in low ceiling
paging and background music applications where wide dispersion, high
efficiency and ease of installation are required. The DLS4 is perfectly
suited for use in airports, rail stations, retail stores, and hospitality
applications.

The system consists of a 4" high efficiency driver. A unique (patent
pending) tap selector switch design allows for easy system tuning. A
full selection of taps up to 8 Watts as well as an 8Ω bypass setting
is included for maximum system versatility. This switch “knob” also
functions as a diffuser cone, providing smooth, even dispersion of the
high frequency content from the center of the 4" driver. In fact, the high
frequency response of the DLS4 is so natural that many would assume
that the driver in the DLS4 was a coaxial design instead of a cone driver.

The easy to use DLS4 “dog leg” mounting system works with several
popular Atlas Sound hardware combinations for use in new or existing
drywall or acoustic ceilings with or without conduit! For mineral tile
applications the popular FA81-4 tile bridge has been equipped to allow
“twist lock” installation of the economical CS95-8.

Mineral Tile - no enclosure - FA81-4 Tile Bridge

Mineral Tile - with enclosure - FA81-4, CS95-8

Drywall Ceiling new construction - no enclosure - FA-TR4

Drywall Ceiling new construction - with enclosure - FA-TR4, E410NT

The DLS4 will also retro-fit into existing E410 & E410-11 enclosures.
(Torsion tabs inside enclosure must be bent inwards to allow for
complete clearance of the DLS4 dog leg mounting system)