Philips HTS6600 Manuale Utente
15
English
Option 4: Using an accessory RF
modulator
modulator
If your TV has only a single Antenna Input
jack (labeled as 75 ohm or RF In,) you
will need an RF modulator in order to
view the DVD playback on the TV. See
your electronics retailer or contact
Philips for details about RF modulator
availability and operations.
jack (labeled as 75 ohm or RF In,) you
will need an RF modulator in order to
view the DVD playback on the TV. See
your electronics retailer or contact
Philips for details about RF modulator
availability and operations.
A
Connect a composite video cable
(supplied) from the VIDEO OUT jack
on the main unit to the video input jack
on the RF modulator.
on the main unit to the video input jack
on the RF modulator.
B
Connect a RF coaxial cable (not supplied)
from the ANTENNA OUT or TO TV
jack on the RF modulator to the
ANTENNA IN jack on the TV.
jack on the RF modulator to the
ANTENNA IN jack on the TV.
C
Connect the Antenna or Cable TV
service signal to the ANTENNA IN or RF
IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV.)
IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV.)
Basic Connections
(continued)
Option 3: Connecting to a
Progressive Scan TV or component
video input
Progressive Scan TV or component
video input
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
A
Connect the component video cables
(red/ blue/green - not supplied) from the
COMPONENT VIDEO OUT
(Y Pb Pr) jacks on the main unit to the
corresponding component video input
jacks (or labeled as Y Pb/Cb
Pr/Cr or YUV) on the TV.
COMPONENT VIDEO OUT
(Y Pb Pr) jacks on the main unit to the
corresponding component video input
jacks (or labeled as Y Pb/Cb
Pr/Cr or YUV) on the TV.
B
If your TV accepts progressive signals,
proceed to chapter ‘Getting Started -
Setting up Progressive Scan feature’ for
detailed progressive feature setup.
Setting up Progressive Scan feature’ for
detailed progressive feature setup.
L
R
AUDIO IN
VIDEO OUT
COMPONENT
VIDEO OUT
Pr
Pb
Y
Option 3
L
Pr
Pb
Y
R
AUDIO IN
COMPONENT
VIDEO OUT
HDMI OUT
VIDEO OUT
INTERFACE
TO SUBWOOFER
AUDIO IN
VIDEO OUT
L
R
TV
Antenna
Rear of an RF modulator
(example only)
Option 4