Lexmark P350 Guida Utente

Reinsert the cartridge.

If the cartridge error returns, install a new cartridge. For more information, see “Installing the print cartridge” on
page 38.

The print cartridge is missing or is not installed properly. For more information, see “Installing the print cartridge” on
page 38.

Make sure that the access cover is closed.

The camera you connected to the printer is not communicating using PictBridge.

Disconnect the camera from the printer.

Check to see if the camera is PictBridge-enabled. For more information, see the camera documentation.

The memory card or flash drive you inserted is empty or contains files that cannot be read by the printer.

Use another memory card or flash drive. For more information, see “Inserting a memory card” on page 19 or “Inserting a
flash drive” on page 20.

25% full

15% full

5% full

Note: These messages and percentages may not apply to the starter cartridge that shipped with your printer.

Install a new print cartridge if necessary. For more information, see “Installing the print cartridge” on page 38.

To order supplies, see “Ordering supplies” on page 42.

Press 

 to continue.

Load photo paper, with the glossy or printable side facing you. (If you are not sure which side is the printable side, see
the instructions that came with the paper.) For more information, see “Loading paper” on page 18.

Press 

.

Make sure your PictBridge-enabled digital camera is properly connected to the printer. For more information, see
“Connecting a PictBridge-enabled digital camera” on page 21.

Troubleshooting