Hitachi VM-E455LA Manuale Proprietario
General Maintenance
62
PLAYBACK OF PRE-RECORDED CASSETTE
Symptom
Check Point & Correction
The PLAY button cannot be engaged.
• Set the CAM/OFF/VIDEO switch to VIDEO.
No picture appears on television screen when The
PLAY is pressed. (TV is connected to the camcorder
by using RF converter unit.)
PLAY is pressed. (TV is connected to the camcorder
by using RF converter unit.)
• Set the television to the camcorder channel (3 or 4)
depending upon the selected channel in the RF channel
select switch of RF converter unit.
depending upon the selected channel in the RF channel
select switch of RF converter unit.
Interference on playback picture. (TV is connected
to the camcorder by using RF converter unit.)
to the camcorder by using RF converter unit.)
• When you see the playback picture on your TV, adjust fine
tuning knob on television set to obtain best picture.
tuning knob on television set to obtain best picture.
Picture bends at the top of the TV screen.
• TV receiver is older type. It needs to be modified to work
properly with camcorder.
• Tape is damaged. Try another cassette.
properly with camcorder.
• Tape is damaged. Try another cassette.
Color of your TV screen is too bright, too faint or
change.
change.
• TV set has VIR circuit. Turn it off during playback.
Date search function does not operate.
• Slide the CAM/OFF VIDEO switch to VIDEO.
• Insert the clock battery, set the date and time, then start
recording.
• Do not remove the clock battery after recording.
• Do not eject the recorded cassette. Leave it in the
camcorder.
• Insert the clock battery, set the date and time, then start
recording.
• Do not remove the clock battery after recording.
• Do not eject the recorded cassette. Leave it in the
camcorder.
BATTERY CONDITION
Symptom
Check Point & Correction
The (
) indication in the electronic viewfinder or on
the LCD monitor flashes to indicate battery is
discharged.
discharged.
• Try another battery or charge the battery.
The battery level indicator (
) appears differently on
the LCD monitor and in the viewfinder.
• This does not indicate a fault; it is because the power
consumed by the LCD monitor and the viewfinder is
different.
consumed by the LCD monitor and the viewfinder is
different.
NO OPERATION IS ACCEPTED
Symptom
Check Point & Correction
Power is turned on, but no
button operations are
accepted.
button operations are
accepted.
• Remove the power source and the clock battery. And after about one minute,
the display in the viewfinder or on the LCD monitor will be reset. Then set the
information again.
the display in the viewfinder or on the LCD monitor will be reset. Then set the
information again.
TAPE DISPLAY
Symptom
Check Point & Correction
"TAPE" appears in the
viewfinder or on the
viewfinder or on the
• Have you moved the camcorder or cassette from a cold place to a warm place so that
its temperature changed abruptly? If the temperature has changed, remove the
its temperature changed abruptly? If the temperature has changed, remove the