Haier bfd45w Manuale Utente

- Not enough detergent was added to input

  compartment.

- Amount of rinse-aid was set too low.

- If you used a phosphate-free detergent,

  try a detergent containing phosphates

  and compare results.

- Selected programme did not include

 drying function function.

- Amount of rinse-aid was set too low.

- Items were removed from dishwasher

  too soon.

- Amount of rinse-aid was set too low.

Items were removed from from dishwasher

too soon.

- Amount of rinse-aid was set too low.

- Detergent does not have a sufficient

  bleaching effect.

- Washing temperature was set too low.

- Cutlery is not sufficiently rustproof.

- Unsuitable detergent was used.

- Glasses are not dishwasher-proof.

- Amount of rinse-aid set too high.

Old appliances still have some residual value.

An envoiment-friendly method of disposal will

ensure that valuable raw materials can be

recovered and used again.

When an appliance has reached the end of

its working life,unplug it from the mains. Cut

through the mains cable and dispose of it

together with the plug.

Destory the door locking mechanism. This

will ensure that children at play cannot be-

come locked inside and are mot exposed to

the risk of suffocation.

Your new appliance was protected by suit-

able packaging while it was on its way to you.

All materials used for this purpose are envi-

ronment-friendly and can be recycled. Please

make a contribution to protecting the envi-

ronment-friendly and can be recycled. Please

make a contribution to protecting the

enviroment by disposing of the packaging.

There is a risk of suffocation by the cardboard

boxes and the plastic wrapping.

Up-to-date information cerning options for

disposal can be obtained from your retailer

or local municipal administration.

In order to function correctly the dish-

washer must be properly installed. Speci-

fications for the water intake and waste-

water drainage, as well as electrical

connections, must fulfil the criteria that are

set out in the following paragraphs and the

installation instructions.

When installing the dishwasher, carry out

tasks in the following order:

- Check contents of delivery upon receipt,

- Site dishwasher,

- Connect drainage hose,

- Connect inlet hose to water supply,

- Connect dishwasher to electricity supply.

All functions of your dishwasher have been

thoroughly tested in the factory. A small

number of water marks have been left on

the dishwasher as a result. They disap-

pear as soon as the appliance is used for

the first time.

Dimensions associated with siting the dish-

washer are contained in the installation

instructions. Ensure that the appliance is

completely level by adjusting the feet.

Make sure that it is standing on a firm

surface.

See the installation instructions for details

of procedure to be followed.

If necessary, fit a siphon trap (U-bend)with

a connecting piece for the drainage hose.

Connect the drainage hose to the trap

using the enclosed parts.