Aiwa hv-dh10 Guida Utente

i/SETUP

OK/ENTER,
i

+/k–, j/l

INPUT SELECT

VIDEO

Numeric

buttons

• Turn on the TV and set the TV for the unit’s reception.
• When the unit and TV are connected with a 21-pin scart

cord, set the TV to the AV mode.

• When they are connected with only the antenna cord, set

the TV to the video output channel.

The Auto set-up function can search and tune all
available TV station and assign them in the unit, then
set the correct time automatically.
The following picture will display on the TV screen
when you have just connected the unit for the very
first time.

Select the country according to your area with j
and l.
A: Austria, B: Belgium, CH: Switzerland,
D: Germany, DK: Denmark, E: Spain, F: France,
I: Italy, N: Norway, NL: Netherlands, P: Portugal,
S: Sweden, SF: Finland, OTHERS: Others

Press OK/ENTER to start the automatic storing
of the channels of the TV stations in your area.
A scan bar appears on the TV screen.

In about ten minutes, after the unit has finished
setting the VCR channels and time, a list of
channels appears on the screen.

i

The name of the TV station is displayed if the
broadcast has PDC/VPS information.

• When the unit receives a signal with PDC

information, it sets the month, day, time and VCR
channels. Set the year manually. See page 23.

• When the unit receives a signal with VPS

information, it sets the time and VCR channels. Set
the year, month and day manually. See page 23.

Press i/SETUP to return to the normal screen.

If the desired TV stations could not be set
Set the VCR channels manually. See page 19.
(Setting the VCR channels is necessary for recording
TV programs.)

If the clock could not be set
If the reception signal is weak, “—:—” appears on the
display window. Set the clock manually. See page
23.
If the PDC/VPS signal is weak, the clock may not be
able set with Auto set-up. In this case, set the clock
manually.

 PM/HV-DH1(EH)/Eng/18-24

5/20/03, 9:43 AM

18