IBM 560z Manuale Hardware
1010 Backup Battery
CAUTION:
The backup battery is a lithium battery and can cause
a fire, an explosion, or severe burns. Do not recharge
it, remove its polarized connector, disassemble it, heat
it above 100°C (212°F), incinerate it, or expose its cell
contents to water. Dispose of the battery as required
by local ordinances or regulations. Use of an
incorrect battery can result in ignition or explosion of
the battery. Replacement batteries can be ordered
from IBM or IBM Authorized Dealers.
The backup battery is a lithium battery and can cause
a fire, an explosion, or severe burns. Do not recharge
it, remove its polarized connector, disassemble it, heat
it above 100°C (212°F), incinerate it, or expose its cell
contents to water. Dispose of the battery as required
by local ordinances or regulations. Use of an
incorrect battery can result in ignition or explosion of
the battery. Replacement batteries can be ordered
from IBM or IBM Authorized Dealers.
Turn the computer upside down.
1
2
3
Note: When putting back the battery, connect the battery
connector using a small screwdriver and place the
battery in a slanted position.
battery in a slanted position.
Step
Size (Quantity)
Torque
1
M2.5 x 7 mm, black bind (1)
4 kgcm
When re-installing: Make sure you use the correct screw,
and tighten it firmly to the torque shown in the table if you
have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screw is
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
and tighten it firmly to the torque shown in the table if you
have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screw is
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
ThinkPad 560Z HMM
45