IBM 560z Manuale Hardware
1090 PC Card Slot Assembly
Battery Pack (1030)
Keyboard Bezel (1050)
Keyboard Bezel (1050)
Note: Before removing and replacing the PC Card slot
assembly, make sure that the PC Cards are
removed and the eject levers are not sticking out.
removed and the eject levers are not sticking out.
Step
Size (Quantity)
Torque
1
M2.5 x 4 mm, black bind (4)
4 kgcm
When re-installing: Make sure you use the correct screw,
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
ThinkPad 560Z HMM
57