IBM 560z Manuale Hardware
1120 Fan
Battery Pack (1030)
Keyboard Bezel (1050)
Heat Sink (1100)
Keyboard Bezel (1050)
Heat Sink (1100)
Apply grease (0.2 grams) over the module. Refer to step
5 on page 60 for the location of the module.
5 on page 60 for the location of the module.
Notes:
1. Do not touch the rotor or the blade of the fan when
assembling or disassembling. You may break it.
2. Do not pinch the fan cable when re-installing the fan.
Step
Size (Quantity)
Torque
1
M2 x 8 mm, yellow flat-head (2)
2 kgcm
When re-installing: Make sure you use the correct screw,
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
ThinkPad 560Z HMM
61