Lexmark T520 Scheda Rapida Di Riferimento

•

Enter the menus from the ready state

•

Scroll through menus or values

•

Increase or decrease a numerical value

•

Display the Job Menu while the printer is busy

•

Select the item on the second line of the display

•

Save the selection as a new default setting

•

Return to the previous menu level

•

Exit printer menus and return to the Ready state

•

Clear messages

•

Temporarily stop all print activity without losing 
data

Complete these instructions to load print materials into any of the standard or 
optional trays. All paper trays are loaded the same way.

1 Remove the paper tray.

2 Pull the width guide tab and slide the width guide to the far right side of 

the tray.

3 Squeeze the length guide lever and slide the length guide to the correct 

position for the size paper you are loading.

4 Place the paper into the paper tray with the recommended print side face 

down for single-sided printing and face up for double-sided printing. Do 
not fill paper above the paper capacity mark (fill line).

Pull the width guide tab and slide the width guide to the left until it lightly rests 
against the edge of the paper stack.

1 Push the lower release latch.

2 Pull the metal bar out far enough to support your paper size.

3 Slide the paper width guide to the far right.

Types:

 Sizes:

Letterhead must be loaded differently depending on whether you want your print 
job to be single-sided or double-sided (duplexed).

1

  Menu  

2

Select  

3

Return  

4

Go  

5

Stop  

6

Pull here

Length
guide

Paper size 
indicators

Width
guide

Length guide 
lever

 Paper and transparencies

           Envelopes

*This size is not available until Size Sensing is turned off. For more information, refer to 

the online information.

Copyright © 2001 Lexmark International, Inc. All rights reserved.

Printed in USA

This document is printed on recycled paper. 5/01

E.C. 2H0003

P/N 09H0412