4XEM bbpchome Manuale Utente
BIOS Configuration
Press <Esc> to close the IDE device sub-menu and return to the
Standard CMOS Features page.
Standard CMOS Features page.
Drive A and Drive B : BBPCHOME doesn’t support FDD
Video : Set this field to the type of graphics card installed in your system.
If you are using a VGA or higher resolution card, choose the
“EGA/VGA” option. The options are:
If you are using a VGA or higher resolution card, choose the
“EGA/VGA” option. The options are:
MONO
CGA 40
CGA 80
EGA/VGA
Halt On : This setting determines which type of errors will cause the
system to halt during boot up. The options are:
system to halt during boot up. The options are:
All Errors
No Errors
All, But Keyboard
All, But Diskette
All, But Disk / Key”.
Base/Extended/Total Memory : These items are automatically
detected by the system at start up time. These are display-only fields.
You cannot make changes to these fields.
detected by the system at start up time. These are display-only fields.
You cannot make changes to these fields.
After you have made your selections in the Standard CMOS Setup
screen, press <ESC> to go back to the main screen.
screen, press <ESC> to go back to the main screen.
Standard CMOS Features
39