Samsung dvd-hd870 Guida Utente

ENG-12

C

O N N E C T I O N S

The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.

- Always turn off the DVD player, TV, and other components before you connect or disconnect any

cables.

- Refer to the user’s manual of the additional components (such as a TV) you are connecting for

more information on those particular components.

Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.

Turn on the DVD player and TV.

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)

- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual

of your TV.

- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD

player.

- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video

Output mode changes in the following sequence: (S-Video

➝ I-SCAN ➝ P-SCAN).

When HDMI is connected, these output modes will not appear. 

- If you set the HDMI output resolution to 720p or 1080i, the S-Video output will not output video.

Set the Video Output to I-SCAN in the Display Setup menu.
(See pages 52 to 54).
You can also use the VIDEO SEL. button to change the Video
Output mode. (See page 12)

Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.