Lexmark x9350 Manuale Utente

Press 

 or 

 until 

On appears.

Press 

 or 

 repeatedly until you reach 

Discovery Mode.

Press 

 or 

 until 

On appears.

Press 

 or 

 repeatedly until you reach 

Security.

Press 

 or 

 until 

Low or High appears, depending on the one you want.

Press 

 or 

 repeatedly until you reach 

Pass Key if you need to define a pass key number (similar to a

password) for the device.

If you are defining a pass key, use the keypad numbers to enter the pass key number.

Press 

 to save and exit.

The message 

Bluetooth Default Print Settings Saved appears. The control panel returns to the

Change Bluetooth Default Settings submenu.

You can print photos from a Bluetooth-enabled device such as a camera phone using a Bluetooth adapter.

Load photo paper with the glossy or printable side facing down. (If you are not sure which side is the printable side,
see the instructions that came with the paper.)

Make sure that the 

Bluetooth Enable and Discovery Mode menu items on your printer control panel are set

to 

On. For more information, see “Setting the Bluetooth mode” on page 110.

Insert a Bluetooth adapter into the PictBridge port on the front of the printer.

MS

XD

SD/M

MC

CF/M

D

PictBrid

ge

A Bluetooth adapter is sold separately.

Once the printer detects the Bluetooth adapter, the following message appears on the printer display for five
seconds: 

Bluetooth Dongle Connected.

Do not touch cables, the Bluetooth adapter, or the printer in the area shown while actively printing from

the Bluetooth-enabled device. A loss of data can occur. Also, do not remove the Bluetooth adapter while actively
printing from the Bluetooth-enabled device.