Lexmark x9350 Manuale Utente

If you are printing an incoming fax, make sure that the paper loaded in
the tray is the default for your country or region selection. The default
paper size corresponds to the country or region that you have selected
during initial setup.

To determine the default paper size, check the message on the display,
and then load paper with the correct size.

If you are printing a photo or a DPOF selection from a memory card or
using a PictBridge-enabled camera to print a photo, the printer does not
support the paper size you have set.

From the control panel, press  .

The 

Paper Handling menu appears.

Press 

 or 

 until the option for 

Size--Tray 1 is highlighted.

Press 

 or 

 to select the size of paper loaded in Tray 1.

Press 

 to save the setting.

or
Paper Out Tray 2

Load paper in the tray that has run out of paper.

Press  .

Make sure that Tray 1 and Tray 2 (if the optional Tray 2 is installed) are
fully inserted into the printer.

(appears when you are making more than
one copy of a multiple-page document
using the Automatic Document Feeder)

Press   and a single copy of the remaining pages in the Automatic
Document Feeder (ADF) is printed.

Load the pages for which you need more copies into the Automatic
Document Feeder (ADF).

Press 

 or 

 repeatedly until 

Copy is highlighted.

Press  .

Press 

 or 

 until the options for 

Copies are highlighted.

Press 

 or 

 to enter the number of copies. Consider entering a

smaller number of copies.

Reload the document and make more copies, if necessary.

Black Cartridge
Unavailable (appears
when printing an incoming
fax)

To continue printing using the color print cartridge:

Press 

 or 

 until 

Yes is highlighted.

Press  .

To insert the black print cartridge:

Press 

 or 

 until 

No is highlighted.

Insert a black cartridge in the left print cartridge carrier. For more information, see
“Installing print cartridges” on page 142.

Press  .