Lexmark c752 Manuale Supplementare

 

The following illustrations show areas in the printer where jams can occur.

Multipurpose feeder

Left access door (beside Tray 1)

Paper input options:

500-sheet drawer or 2000-sheet drawer

Finisher

Mailbox or output expander

Upper right access door (redrive area)

Lower right access door (fuser area)

Duplex tray

Front access door

Standard tray (Tray 1)

Duplex mechanism

Paper input options:

500-sheet drawer or 2000-sheet drawer

P/N 15G1996

© 2003 Lexmark International, Inc.

Printed in China

E.C. 3G0049

All rights reserved.

6/03

When a paper jam occurs, the printer stops operating and 
displays 

 and a message to clear certain 

printer areas.

After you have cleared the following areas, make sure all 
printer covers, doors, and trays are closed, and then press 
Go to resume printing.

If you are using the multipurpose feeder, release the 
levers on each side of the feeder to open it flat.

Remove any jams and return the feeder to its working 
position.

Open the left access door.

Pull down the lever until it stops.

Remove the jam.

Return the lever to its upright position.

Close the door.

If you have one or more optional 500-sheet drawers:

Open the 500-sheet drawer access door. Hold the 
door down while removing jams.

Make sure the entire paper stack is loaded 
correctly and pushed all the way down into 
the tray.

Close the door.

If you have an optional 2000-sheet drawer:

Open the 2000-sheet drawer access door. Pull the 
jam down and out of the rollers.

Close the door.