Lexmark 45n Guida Utente
Chapter 6: Solving Printer Problems
170
Sol
v
ing P
rinter P
roblems
Caring for Your Printer
Option Problems
Problem
Action
Option does not
operate correctly
after it is installed
or it quits working.
operate correctly
after it is installed
or it quits working.
Unplug the printer, wait for about 10 seconds, and plug
the printer back in. If this does not fix the problem,
unplug the printer and check the connection between
the option and printer.
the printer back in. If this does not fix the problem,
unplug the printer and check the connection between
the option and printer.
Note:
Print the menu settings page and check to see if
the option is listed in the Installed Options list. If the
option is not listed, reinstall it. See “Verifying the
Installation of Options” on page 249 for more
information.
Make sure the option is selected in the software appli-
cation you are using. For Macintosh users, make sure
the printer is set up in CHOOSER.
option is not listed, reinstall it. See “Verifying the
Installation of Options” on page 249 for more
information.
Make sure the option is selected in the software appli-
cation you are using. For Macintosh users, make sure
the printer is set up in CHOOSER.
Optional Tray 2:
Make sure tray 2 is correctly installed
on the back of the printer. Refer to the documentation
that comes with the tray 2 option for more information.
that comes with the tray 2 option for more information.