Lexmark 45n Guida Utente
219
Chapter 9: Memory and Option Cards
Memory and O
p
tion Cards
Installing Options
3
Reconnect all cables on the back of the printer.
4
Reconnect the power cord to the printer and a properly
grounded electrical outlet.
grounded electrical outlet.
5
Make sure the
Ready
message appears on the operator
panel display.
If an error message appears, see “Understanding Printer
Messages” on page 145.
Messages” on page 145.
Note:
To verify that the memory card option is installed properly,
see “Verifying the Installation of Options” on page 249.
see “Verifying the Installation of Options” on page 249.
Flash Memory
The flash memory option is useful for storing information such as
downloaded fonts, macros, symbol sets, logos, and forms.
downloaded fonts, macros, symbol sets, logos, and forms.
You can install one flash memory option in your printer. Flash
memory options available are 1, 2, and 4MB.
memory options available are 1, 2, and 4MB.
Note:
Data stored in flash memory is retained when the printer is
unplugged.
unplugged.
Accessing the Printer System Board on the
Back of the Printer
Back of the Printer
Complete the following steps before you install a flash memory
option:
option:
1
Turn the printer around so the back is facing you.
2
Unplug the printer power cord.
3
Disconnect all cables from the back of the printer.