Lexmark Z55 Guida Utente

The following paragraph does not apply 
to any country where such provisions 
are inconsistent with local law: 
LEXMARK INTERNATIONAL, INC., 
PROVIDES THIS PUBLICATION “AS IS” 
WITHOUT WARRANTY OF ANY KIND, 
EITHER EXPRESS OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. Some states do 
not allow disclaimer of express or implied 
warranties in certain transactions; 
therefore, this statement may not apply to 
you.

This publication could include technical 
inaccuracies or typographical errors. 
Changes are periodically made to the 
information herein; these changes will be 
incorporated in later editions. 
Improvements or changes in the products 
or the programs described may be made at 
any time.

Comments about this publication may be 
addressed to Lexmark International, Inc., 
Department F95/032-2, 740 West New 
Circle Road, Lexington, Kentucky 40550, 
U.S.A. In the United Kingdom and Eire, 
send to Lexmark International Ltd., 
Marketing and Services Department, 
Westhorpe House, Westhorpe, Marlow 
Bucks SL7 3RQ. Lexmark may use or 
distribute any of the information you supply 
in any way it believes appropriate without 
incurring any obligation to you. You can 
purchase additional copies of publications 
related to this product by calling 1-800-553-
9727. In the United Kingdom and Eire, call 
0628-481500. In other countries, contact 
your point of purchase.

References in this publication to products, 
programs, or services do not imply that the 
manufacturer intends to make these 
available in all countries in which it 
operates. Any reference to a product, 
program, or service is not intended to state 
or imply that only that product, program, or 
service may be used. Any functionally 
equivalent product, program, or service that 
does not infringe any existing intellectual 
property right may be used instead. 
Evaluation and verification of operation in 
conjunction with other products, programs, 
or services, except those expressly 
designated by the manufacturer, are the 
user’s responsibility.

Lexmark and Lexmark with diamond design 
are trademarks of Lexmark International, 
Inc., registered in the United States and/or 
other countries.

Color Jetprinter is a trademark of Lexmark 
International, Inc.

Other trademarks are the property of their 
respective owners.

UNITED STATES GOVERNMENT 
RESTRICTED RIGHTS
This software and documentation are 
provided with RESTRICTED RIGHTS. Use, 
duplication or disclosure by the 
Government is subject to restrictions as set 
forth in subparagraph (c)(1)(ii) of the Rights 
in Technical Data and Computer Software 
clause at DFARS 252.227-7013 and in 
applicable FAR provisions: Lexmark 
International, Inc., Lexington, KY 40550.

The Lexmark Z55 Color Jetprinter, 
Type 4106, has been tested and found to 
comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC 
Rules. Operation is subject to the following 
two conditions: (1) this device may not 
cause harmful interference, and (2) this 
device must accept any interference 
received, including interference that may 
cause undesired operation.

The FCC Class B limits are designed to 
provide reasonable protection against 
harmful interference in a residential 
installation. This equipment generates, 
uses and can radiate radio frequency 
energy and, if not installed and used in 
accordance with the instructions, may 
cause harmful interference to radio 
communications. However, there is no 
guarantee that interference will not occur in 
a particular installation. If this equipment 
does cause harmful interference to radio or 
television reception, which can be 
determined by turning the equipment off 
and on, the user is encouraged to try to 
correct the interference by one or more of 
the following measures:

• Reorient or relocate the receiving 

antenna.

• Increase the separation between the 

equipment and receiver.

• Connect the equipment into an outlet 

on a circuit different from that to which 
the receiver is connected.

• Consult your point of purchase or 

service representative for additional 
suggestions.

The manufacturer is not responsible for any 
radio or television interference caused by 
using other than recommended cables or 
by unauthorized changes or modifications 
to this equipment. Unauthorized changes or 
modifications could void the user’s authority 
to operate this equipment.

Note: To assure compliance with FCC 
regulations for a Class B computing device, 
use a properly shielded and grounded 
cable such as Lexmark part number 
1329605 for parallel attach or Lexmark part 
number 12A2405 for USB attach. Use of a 
substitute cable not properly shielded and 
grounded may result in a violation of FCC 
regulations.

Any questions regarding this compliance 
information statement should be directed to 
Director of Lab Operations, Lexmark 
International, Inc., 740 New Circle Road 
NW, Lexington, KY 40550, (859) 232-3000.

The EPA ENERGY STAR office equipment 
program is a partnership effort with 
computer manufacturers to promote the 
introduction of energy-efficient products 
and to reduce air pollution caused by power 
generation.

Companies participating in this program 
introduce personal computers, printers, 
monitors, or fax machines that power down 
when they are not being used. This feature 
will cut the energy used by up to 50 
percent. Lexmark is proud to be a 
participant in this program.

As an ENERGY STAR Partner, Lexmark 
International, Inc. has determined that this 
product meets the ENERGY STAR 
guidelines for energy efficiency.

This Class B digital apparatus meets all 
requirements of the Canadian Interference-
Causing Equipment Regulations.

Cet appareil numérique de la classe B 
respecte toutes les exigences du 
Règlement sur le matériel brouilleur du 
Canada.

This product is in conformity with the 
protection requirements of EC Council 
directives 89/336/EEC and 73/23/EEC on 
the approximation and harmonization of the 
laws of the Member States relating to 
electromagnetic compatibility and safety of 
electrical equipment designed for use 
within certain voltage limits. 

A declaration of conformity with the 
requirements of the Directive has been 
signed by the Director of Manufacturing and 
Technical Support, Lexmark International, 
S.A., Boigny, France.

This product satisfies the Class B limits of 
EN 55022 and safety requirements of EN 
60950.

This apparatus is approved under the 
approval number NS/G/1234/J/100003 for 
the indirect connections to the public 
telecommunications systems in the United 
Kingdom.

• Use only the Lexmark power supply 

provided with this product or an 
authorized Lexmark replacement 
power supply.

• Connect the power cord to an electrical 

outlet that is near the product and 
easily accessible.

• Refer service or repairs, other than 

those described in the manual, to a 
professional service person.