Bryston BCD-1 Manuale Proprietario

712 : B100 integrated amplifier

 

 

715 : BCD-1 (since there is no volume/mute control in the BCD-1 code 715 merely disables those buttons on the remote)

 

 

721 : BP26 preamp

722 : B60R integrated amplifier & BP6 preamp

The red LED will flash twice after a code has been entered successfully.

POWER button:

  

 Toggles power to the BCD-1 on and off. Note that the POWER button (both on the remote and on the BCD-

1’s front panel) will not work when the External (Remote) Trigger has been enabled.

VOLUME  / : 

Increases / decreases the volume respectively.

MUTE button:  

Mutes the audio outputs of the BCD-1

NUMERIC buttons:   

Used in conjunction with the PLAY button to advance to and begin playing specific tracks (enter a one or

two digit number and press PLAY). Also used in conjunction with the CODE button to program both the IR 

remote and the BDC-1 itself (See previous page for more details).

TIME button:   

 Pressing the TIME button initially causes the display 

to show the elapsed time of the track that is play-

ing. Pressing the TIME button again changes the 

display to show the remaining track time. Press-

ing it a 3rd time shows the elapsed time for the entire disc, 

and pressing it a 4th time shows the remaining time for the 

entire disc. The time display will continue to cycle through 

these various modes with every subsequent press of the TIME button.

SCAN button:   

Automatically plays the first 10 seconds of each track. To stop scanning the disc and

play the track currently being previewed, press SCAN again. Pressing the PLAY button 

while in the middle of scanning a track will restart the 10 second scan of the current 

track. Both the NEXT and PREVIOUS track buttons can be used while scanning

RANDOM button: 

 Plays all tracks on the disc in a random order. Display will show “RANDOM” when 

engaged. Pressing RANDOM a second time will cause normal play to resume.

REPEAT button: 

 Press once to repeat the current track; display will show “RPT 

TRACK”. Press again to repeat the entire disc; display will 
show “RPT DISC”. Press REPEAT again to cancel repeat 

modes.

BACK button:  

Back or review plays in reverse at several times the normal speed until the button is released. 

PREVIOUS button: 

Advances immediately to the beginning of the previous track.

NEXT button:   

Advances immediately to the beginning of the next track.

FORWARD button: 

Fast forward or preview plays at several times the normal speed until the button is released. 

EJECT button: 

Stops play immediately and opens the disc drawer.

STOP button:   

Stops play immediately. Subsequently pressing PLAY will begin play from beginning of disc.

PAUSE button: 

 

Stops play immediately. Subsequently pressing PAUSE will resume play from the paused position. Pressing 

PLAY after the disc has been PAUSED will cause play to resume from the beginning of the current track.

PLAY button:   

Plays disc. Entering a 1 or 2 digit number and then pressing PLAY will play that track number.

Page 4

ELECTRICAL SPECIFICATIONS

Standby: 0.84W    

Idle: 7.2W 

Play: 9W.

CAUTION

The BCD-1 contains a class 1 laser and although this is considered inherently safe do not operate the BCD-1 without the top panel on.

bcd1_manual_20070628

BCD-1 EXTERNAL DIMENSIONS