Standard Horizon cp390i Guida Utente

Page 112

CP390i and CPF390i

Figure 16.3.0a - Example of PTX warning window

It is possible to Goto (navigate) to the received MOBILARM PTX position (see Par. 16.4.1)
or open the MOBILARM Alarm Status List page (see Par. 16.4.2). Selecting Goto or Alarm
Status List will mute the Audible Alarm.

When the same PTX is received again:
a. If the received PTX is not the active one, the user must confirm to navigate to it.
b. If the received PTX is the active one, navigation data is updated. The PTX icon appears at the

new position and a pop-up warning window appears.

Moving the ShuttlePoint knob so the cursor is over the PTX icon on the Chart page will show
an information window and allow you to Goto the location of the PTX, delete the PTX icon
or show the Alarm Status list as shown below.

Figure 16.4 - Example of PTX information window

The Delete PTX function permamently removes the selected PTX from the MOBILARM
Alarm Status List and from the Chart page. Using the ShuttlePoint knob, move the cursor
over the PTX icon and then press [D

]. A warning pop-up window will be shown. Select

YES and press [ENT].

When Goto is selected on the GPS Chart Plotter, navigation will start to the PTX icon
location. After the GPS Chart Plotter has received a PTX MOB alarm, using the ShuttlePoint
knob move the cursor over the PTX to navigate to and then two Soft Keys under the display