Standard Horizon cp390i Guida Utente
CP390i and CPF390i
Page 19
2.4.1.1 Connection a Video Camera, FF525, AIS Receiver, VHF and Autopilot
NOTE
Port2 Input and Output is used by the optional FF525. In the diagram above you will notice Port2
Input and Output wires are shown in gray and not used.
Input and Output wires are shown in gray and not used.
Port4, and Port5 Outputs are can be connected to NMEA devices*capable of listening to
NMEA-0183 sentences.
NMEA-0183 sentences.
Port4, and Port5 Inputs can be connected to NMEA devices* capable of outputting to NMEA-0183
sentences.
sentences.
The Input and Output baud rate for each Port is set using the Advanced
Setup>In/Out Connections menu. For example if Port1 is set for AIS 38400, the
Input Port operates at 38400 baud and the Output Port is disabled.
Setup>In/Out Connections menu. For example if Port1 is set for AIS 38400, the
Input Port operates at 38400 baud and the Output Port is disabled.
NOTE*
RS232 not opto-isolated electrical interface.