Standard Horizon cp390i Guida Utente

Page 50

CP390i and CPF390i

3. Press and hold [PWR] to turn the GPS Chart Plotter On.
4. The GPS Chart Plotter’s display will show a message that the Built-In Charts are being

uploaded.

5. After uploading the GPS Chart Plotter will check to ensure the charts have been loaded

correctly and show a message.

If  the message shows the charts were not updated correctly, follow steps 1-4 again. If the GPS
Chart Plotter shows a error message again, contact  C-MAP USA at  (800) 424-2627 for assistance.

Hold the C-CARD by the long inclined side so that you can see the C-MAP B

Y

 J

EPPESEN

 label.

Figure 5.1 - Inserting C-CARD

Open the door, gently push the C-CARD into the slot: push the C-CARD in as far as it will
go, then close the door.

Figure 5.1a - Inserting C-CARD (details)

The small connector below the C-CARD is only used by STANDARD HORIZON repair technicians.

Key points are:

· ISO Certification (electronic chart production process with quality certification)