Standard Horizon cp390i Guida Utente
CP390i and CPF390i
Page 65
Figure 7.4 - GOTO Menu (1)
3. Move the ShuttlePoint knob to highlight CURSOR and press [ENT].
Figure 7.4a - GOTO Menu (2)
4. The GPS Chart Plotter is now navigating from your current position to the location
selected at step 1. A bearing line between the vessels location and the destination point
is shown. A popup window shows the Distance (DST) and Bearing (BRG) from the
vessels location to the destination point. Soft Keys are also shown that allow you to
quickly switch to the Highway page, to Route Check or to stop navigation.
is shown. A popup window shows the Distance (DST) and Bearing (BRG) from the
vessels location to the destination point. Soft Keys are also shown that allow you to
quickly switch to the Highway page, to Route Check or to stop navigation.
5. Moving the ShuttlePoint knob, the popup window disappears.
Figure 7.4b - GOTO Menu (3)
6. The GPS Chart Plotter is in Cursor Mode, to switch to Home Mode press [CLR] so the
vessel will stay in the center of the page.
7. To stop navigation, press [GOTO] and a Warning window is shown. Move the
ShuttlePoint knob to highlight STOP and press [ENT].
Figure 7.4c - Warning window