Manualsbrain.com
  1. Manuali
  2. Marche
  3. Standard Horizon
  4. cp390i
  5. Guida Utente

Standard Horizon cp390i Guida Utente

Scarica
Pagina di 149
CP390i and CPF390i
Page 79
2. Press  [MENU], move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
3. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT].
4.  A screen will appear. Move the ShuttlePoint knob to the left to highlight SAVE and press
[ENT].
5. A popup SAVE FILE window will appear. In this window you can change the name and
the file type by using the ShuttlePoint knob and pressing [ENT], when finished press
[CLR] once.
6. To save the file, move the ShuttlePoint knob to SAVE in window and press [ENT].
7. A Information popup window will momentarily be shown “SAVING” then show “SAVING
OK”.
8. Press [ENT] to confirm.
11.0.2 Loading a file from the optional User C-CARD
If you have a problem and accidentally loose the User Points in the GPS Chart Plotter with
the optional User C-CARD it is possible to load the data back into the GPS Chart Plotter
using the following procedure:
1. Press  [MENU], move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT].
3. Select the saved file from the User C-CARD list by using the ShuttlePoint knob and press
[ENT].
4. Move the ShuttlePoint knob to the left to highlight LOAD and press [ENT].
5. A popup information window will appear when loading is complete.
6. Press [ENT] to confirm.
11.0.3 Deleting a file from the optional User C-CARD
You may want to delete a saved file on the User C-CARD.
1. Press  [MENU], move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT].
3. Select the saved file from the User C-CARD list by using the ShuttlePoint knob and press
[ENT].
4. Move the ShuttlePoint knob to the left to highlight DELETE and press [ENT].
5. A popup Warning window will to confirm you want to delete the file.
6. Press [ENT] to confirm.
11.0.4 Refreshing the optional User C-CARD
You may want to change the User C-CARD inserted in the slot with a new one.
1. Press  [MENU], move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT].
3. Open the door, remove the User C-CARD from the slot and insert another User C-CARD
into the same slot.
4. Move the ShuttlePoint knob to highlight REFRESH and press [ENT]. This "new" User
C-CARD is now ready to receive and store information.