LG LF98110AS Manuale Utente

6.1 Lighting of the hob burners
Before lighting the hob burners check that the flame caps are in the 
correct position and that their burner caps are in place, making sure 
that the holes A in the flame caps correspond to the spark plugs 
and thermocouples.
The optional grid B is for use with “woks” (Chinese pans).
To prevent deterioration of the hob we have equipped the cooker 
with a raised pan stand C to be placed underneath pans more than 
26 cm in diameter.
The supplied reduction rest C is used also for small pans.

The drawing next to each knob shows the 
corresponding burner. The appliance has an 
electronic lighting device. Simply press and turn the 
knob anticlockwise to the minimum flame symbol   , 
until the flame is lit. Hold the knob down for a few 
seconds to allow the thermocouples to heat up. The 
burner may go out when the knob is released: this is because the 
thermocouple has not been sufficiently heated. Repeat the 
operation holding down the knob a little longer. This operation is not 
necessary for burners without thermocouples.

For models with thermocouples, should the burner accidentally 
go out, a safety device will be activated which stops the gas 
flow even if the tap is open.