LG 65VS10-BAA Guida Al Funzionamento

 

y

Disconnect the power cord first, and then 
move or install the Monitor set. Otherwise 
electric shock may occur.

 

y

If you install the Monitor set on a ceiling or 
slanted wall, it may fall and result in severe 
injury. Use an authorized LG wall mount 
and contact the local dealer or qualified 
personnel.

 

y

 Do not over tighten the screws as this may 
cause damage to the Monitor set and void 
your warranty. 

 

y

 Use the screws and wall mounts that 
meet the VESA standard. Any damages 
or injuries by misuse or using an improper 
accessory are not covered by the warranty.

 

y

The wall mount kit includes an installation 
manual and necessary parts.

 

y

The wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.

 

y

The length of screws may differ depending 
on the wall mount. Be sure to use the proper 
length.

 

y

For more information, refer to the 
instructions supplied with the wall mount.

If you want to mount the monitor on the wall (op-
tional), attach the wall mounting bracket to the rear 
of the monitor.
Make sure that the wall mounting bracket is se-
curely fixed to the monitor and to the wall.
Use the wall mount plate and screws that comply 
with the VESA standard as specified below.

 

y

785mm(31 inch) or greater

* Fastening screw: Diameter 6.0 mm x Pitch 1.0 

mm x Length 10 mm

(32 inch is Diameter 4.0 mm x Pitch 0.7 mm x 

Length 10 mm)

Install the monitor at least 10 cm away from the 
wall and leave about 10 cm of space at each side 
of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from 
your local retail store. Please refer to the manual 
to install and set up a tilting wall mounting bracket.

10 cm

10 cm

10 cm

10 cm

10 cm