Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP Manuale Utente
Codici prodotto
SRX-MP-1SFP
Table 42: 1-Port Clear Channel DS3/E3 GPIM LED States (continued)
Description
State
Color
LED
Port is receiving remote defect
indication (RDI) alarm.
indication (RDI) alarm.
On
Amber
RDI
There are no alarms or defects.
On
Green
ALARM
An alarm or a defect is present.
On
Red
Out-of-frame (OOF) RX
multi-frame is not aligned.
multi-frame is not aligned.
On
Amber
OOF
Related
Documentation
•
•
•
•
•
•
•
•
1-Port Clear Channel DS3/E3 GPIM Components
The 1-Port Clear Channel DS3/E3 GPIM contains the components listed in
.
Table 43: 1-Port Clear Channel DS3/E3 GPIM Components
Description
Location
Component
Use the ONLINE/OFFLINE
button to gracefully shut down
the GPIM. Press down and hold
the button for 4 to 5 seconds;
then release. The GPIM
gracefully shuts down and
turns off the power supply
units (PSUs).
button to gracefully shut down
the GPIM. Press down and hold
the button for 4 to 5 seconds;
then release. The GPIM
gracefully shuts down and
turns off the power supply
units (PSUs).
To power up the GPIM (if the
Services and Routing Engine
[SRE] is off), press and hold
the ONLINE/OFFLINE button
for 4 to 5 seconds.
Services and Routing Engine
[SRE] is off), press and hold
the ONLINE/OFFLINE button
for 4 to 5 seconds.
Right side of the GPIM
ONLINE/OFFLINE button
Only SRX650 Services
Gateway supports
hot-swappable functionality
for GPIMs.
Gateway supports
hot-swappable functionality
for GPIMs.
103
Copyright © 2012, Juniper Networks, Inc.
Chapter 11: 1-Port Clear Channel DS3/E3 GPIM