Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP Manuale Utente
Codici prodotto
SRX-MP-1SFP
•
•
•
Dual CT1/E1 GPIM Components
The Dual CT1/E1 Gigabit-Backplane Physical Interface Module (GPIM) contains the
components listed in
components listed in
.
Table 64: Dual CT1/E1 GPIM Components
Description
Location
Component
Use the GPIM ONLINE/OFFLINE button to
gracefully shut down the GPIM.
gracefully shut down the GPIM.
Right side of the GPIM
GPIM
ONLINE/OFFLINE
button
ONLINE/OFFLINE
button
Only SRX650 Services
Gateway supports
hot-swappable
functionality for
GPIMs.
Gateway supports
hot-swappable
functionality for
GPIMs.
E1 Mode:
•
Transmit bit rate:
2.048 Mbps
2.048 Mbps
•
Receive bit rate:
2.048 Mbps
2.048 Mbps
T1 Mode:
•
Transmit bit rate:
1.544 Mbps
1.544 Mbps
•
Receive bit rate:
1.544 Mbps
1.544 Mbps
Middle of the GPIM
Two fixed T1/E1 ports
labeled 0 and 1
labeled 0 and 1
Each port can be
configured using the
CLI in T1 or E1 mode.
configured using the
CLI in T1 or E1 mode.
Use the captive screws to hold the GPIM in
place in the services gateway.
place in the services gateway.
One on each side of
the GPIM
the GPIM
Captive screws
Related
Documentation
•
•
•
•
•
•
Dual CT1/E1 GPIM Basic Configuration
To enable the Dual CT1/E1 Gigabit-Backplane Physical Interface Module (GPIM) installed
on your SRX Series Services Gateway, you must configure its properties. You can perform
on your SRX Series Services Gateway, you must configure its properties. You can perform
153
Copyright © 2012, Juniper Networks, Inc.
Chapter 16: Dual CT1/E1 GPIM