Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP Manuale Utente
Codici prodotto
SRX-MP-1SFP
Related
Documentation
•
•
•
SRX Series Services Gateway Mini-Physical Interface Modules Overview
A Mini-Physical Interface Module (Mini-PIM) is a network interface card (NIC) that is
installed on the SRX Series Services Gateway to provide physical connections to a LAN
or a WAN. The Mini-PIM receives incoming packets from the network and transmits
outgoing packets to the network.
installed on the SRX Series Services Gateway to provide physical connections to a LAN
or a WAN. The Mini-PIM receives incoming packets from the network and transmits
outgoing packets to the network.
lists the Mini-PIMs and their model numbers.
Table 3: SRX Series Services Gateway Mini-PIMs Model Numbers
Model Numbers
Mini-PIMs
SRX-MP-1SFP
1-Port Small Form-Factor Pluggable (SFP)
SRX-MP-1SFP-GE
1-Port Gigabit Ethernet Small Form-Factor
Pluggable (SFP)
Pluggable (SFP)
SRX-MP-1ADSL2-A (Annex A)
SRX-MP-1ADSL2-B (Annex B)
SRX-MP-1ADSL2-B (Annex B)
ADSL2+
SRX-MP-1DOCSIS3
DOCSIS
SRX-MP-8GSHDSL
G.SHDSL
SRX-MP-1Serial
Serial
SRX-MP-1T1E1
T1/E1
SRX-MP-1VDSL2-A (Annex A)
VDSL2 (Annex A)
The Mini-PIMs supported on the SRX Series Services Gateway are field-replaceable. You
can install a Mini-PIM into the Mini-PIM slot on the front panel of the services gateway
chassis.
can install a Mini-PIM into the Mini-PIM slot on the front panel of the services gateway
chassis.
CAUTION:
The Mini-PIMs available on the SRX Series Services Gateway are
not hot-swappable. You must power off the device before removing or
installing Mini-PIMs.
installing Mini-PIMs.
Related
Documentation
•
•
Copyright © 2012, Juniper Networks, Inc.
4
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide