Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP Manuale Utente
Codici prodotto
SRX-MP-1SFP
Using the J-Web Interface
To perform basic configuration for the 1-Port DOCSIS Mini-PIM and to configure network
interfaces for the services gateway using the J-Web interface:
interfaces for the services gateway using the J-Web interface:
1.
In the J-Web interface, select Configure>Interfaces>Ports.
The Interfaces page displays and lists the network interfaces present on the services
gateway, along with configuration information (if configured).
gateway, along with configuration information (if configured).
2.
To configure properties for a network interface (Mini-PIM), select the interface name
(cm-1/0/0), and click Edit.
(cm-1/0/0), and click Edit.
3.
To use the port on the Mini-PIM, you must assign it to a security zone other than the
Null zone. Optionally, you can also assign the port an IP address (for example,
192.168.3.1/24). Enter or select the following settings:
Null zone. Optionally, you can also assign the port an IP address (for example,
192.168.3.1/24). Enter or select the following settings:
a.
Select Configure>Security>Zones.
b.
Add or select a security zone other than Null; for example, Trust.
c.
For host inbound traffic, set the following:
•
System Services=Allow All
•
Protocols=Allow All
d.
Click OK to save changes, and click Commit to apply the configuration and other
pending changes.
pending changes.
4.
To use the port on the Mini-PIM, you must also set security policies. Select the following
settings:
settings:
a.
Select Configure>Security>Policy>Apply Policy.
b.
Set Policy Action: Default Policy Action=Permit-All.
c.
Click OK to save changes, and click Commit to apply the configuration and other
pending changes (if any).
pending changes (if any).
For more information, in the J-Web interface, select Configure>Interfaces and click
Help.
Help.
Using the CLI
To perform basic configuration of the 1-Port DOCSIS Mini-PIM and to configure network
interfaces for the services gateway with the CLI:
interfaces for the services gateway with the CLI:
•
Verify that the 1-Port DOCSIS Mini-Physical Interface Module is installed on the services
gateway:
gateway:
show chassis hardware
•
Verify the status of the interface:
show interfaces terse
47
Copyright © 2012, Juniper Networks, Inc.
Chapter 4: 1-Port DOCSIS Mini-Physical Interface Module