Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP Manuale Utente
Codici prodotto
SRX-MP-1SFP
The device to which you are connecting and the serial interface types determine which
type of cable you need.
type of cable you need.
Table 29: Juniper Networks Serial Cables
Connector
Type
Type
Length
Interface Type
Product Number
Female
3.04 m (10 ft)
EIA530 cable (DCE)
JX-CBL-EIA530-DCE
Male
3.04 m (10 ft)
EIA530 cable (DTE)
JX-CBL-EIA530-DTE
Female
3.04 m (10 ft)
RS232 cable (DCE)
JX-CBL-RS232-DCE
Male
3.04 m (10 ft)
RS232 cable (DTE)
JX-CBL-RS232-DTE
Female
3.04 m (10 ft)
RS449 cable (DCE)
JX-CBL-RS449-DCE
Male
3.04 m (10 ft)
RS449 cable (DTE)
JX-CBL-RS449-DTE
Female
3.04 m (10 ft)
V.35 cable (DCE)
JX-CBL-V35-DCE
Male
3.04 m (10 ft)
V.35 cable (DTE)
JX-CBL-V35-DTE
Female
3.04 m (10 ft)
X.21 cable (DCE)
JX-CBL-X21-DCE
Male
3.04 m (10 ft)
X.21 cable (DTE)
JX-CBL-X21-DTE
Related
Documentation
•
•
•
•
•
•
1-Port Serial Mini-Physical Interface Module Basic Configuration
To enable the 1-Port Serial Mini-Physical Interface Module (Mini-PIM) installed on the
SRX Series Services Gateway, you must configure its properties. You can perform the
same configuration tasks using either the J-Web interface or the CLI. In addition, you can
configure a wide variety of options that are not encountered frequently.
SRX Series Services Gateway, you must configure its properties. You can perform the
same configuration tasks using either the J-Web interface or the CLI. In addition, you can
configure a wide variety of options that are not encountered frequently.
•
•
Copyright © 2012, Juniper Networks, Inc.
70
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide