Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP Manuale Utente
Codici prodotto
SRX-MP-1SFP
Table 33: 1-Port SFP Mini-PIM LED States
Description
State
Color
LED
Port is online
On
Green
LINK
Port is offline
Off
Port is receiving or sending data
Blinking
Green
ACT
Port might be on but is not receiving or
sending data
sending data
Off
Related
Documentation
•
•
•
•
•
•
1-Port SFP Mini-Physical Interface Module Basic Configuration
To enable the 1-Port Small Form-Factor Pluggable Mini-Physical Interface Module (SFP
Mini-PIM) installed on the SRX Series Services Gateway, you must configure the properties.
You can perform the same configuration tasks using either the J-Web interface or the
CLI. In addition, you can configure a wide variety of options that are not encountered
frequently.
Mini-PIM) installed on the SRX Series Services Gateway, you must configure the properties.
You can perform the same configuration tasks using either the J-Web interface or the
CLI. In addition, you can configure a wide variety of options that are not encountered
frequently.
•
•
Using the J-Web Interface
To perform basic configuration of the 1-Port SFP Mini-PIM and to configure network
interfaces for the services gateway using the J-Web interface:
interfaces for the services gateway using the J-Web interface:
1.
In the J-Web interface, select Configure>Interfaces>Ports.
The Interfaces page displays and lists the network interfaces present on the services
gateway, along with configuration information (if configured).
gateway, along with configuration information (if configured).
2.
To configure properties for a network interface (Mini-PIM), select the interface name,
and click Edit.
and click Edit.
Copyright © 2012, Juniper Networks, Inc.
78
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide