LG F1496QDW3 Guida Utente

Lift the washing machine off the foam base.
•

After removing the carton and shipping material, 
lift the washing machine off the foam base. Make 
sure the tub support comes off with the base 
and is not stuck to the bottom of the washing 
machine.

•

If you must lay the washing machine down to 
remove the carton base, always protect the side 
of the washing machine and lay it carefully on 
its side. DO NOT lay the washing machine on its 
front or back.

Tub Support 

(Optional)

Carton base

Remove the bolt assemblies.
•

Starting with the bottom two shipping bolts, use 
the spanner (included) to fully loosen all shipping 
bolts by turning them counterclockwise. Remove 
the bolt assemblies by wiggling them slightly 
while pulling them out.

Retainer

Shipping

bolt

Install the hole caps.
•

Locate the hole caps included in the accessory 
pack and install them in the shipping bolt holes.

Cap

•

Save the bolt assemblies for future use. To 
prevent damage to internal components, DO NOT 
transport the washing machine without reinstalling 
the shipping bolts.

•

Failure to remove shipping bolts and retainers 
may cause severe vibration and noise, which 
can lead to permanent damage to the washing 
machine. The cord is secured to the back of the 
washing machine with a shipping bolt to help 
prevent operation with shipping bolts in place.

,