LG BP350 Manuale Utente

22

S

ys

tem  Se

tting

Each disc has a variety of audio output options. Set 
the player’s Audio options according to the type of 
audio system you use. 

Since many factors affect the type of audio 
output, see “Audio Output Specifications” on 
page 52 for details.

 

,

Note

[Auto]
Select if you connect this unit’s HDMI OUT jack 
to a device with LPCM, Dolby Digital, Dolby 
Digital Plus, Dolby TrueHD, DTS and DTS-HD 
decoder.

[PCM]
Select if you connect this unit’s HDMI OUT jack 
to a device with digital decoder.

[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT jack 
to a device with DTS decoder.

 

 

y When [Digital Output] option is set to 

[Auto], the audio may output as bitstream. 
If the bitstream information is not detected 
from HDMI device with EDID, the audio may  
output as PCM.

 

y If the [Digital Output] option is set to [DTS 

Re-Encode], the DTS Re-Encode audio is 
outputted for BD-ROM discs with secondary 
audio and the original audio is outputted 
for the other discs (like [Auto]).

 

,

Note

[48 kHz]
Select this if your A/V Receiver or Amplifier is 
not capable of handling 192 kHz and 96 kHz 
signal. When this choice is made, this unit 
automatically converts any 192 kHz and 96 kHz 
signals to 48 kHz so your system can decode 
them. 

[96 kHz]
Select this if your A/V Receiver or Amplifier is 
not capable of handling 192 kHz signals. When 
this choice is made, this unit automatically 
converts any 192 kHz signals to 96 kHz so your 
system can decode them. 

[192 kHz]
Select this if your A/V Receiver or Amplifier is 
capable of handling 192 kHz signals.

Check the documentation for your A/V Receiver or 
Amplifier to verify its capabilities.

BP350-N_MFL68887351_MEX_ENG_1.0.indd   22

2015-02-17     4:15:46