LG 42LV555H Manuale Proprietario

206-4200

Caution: (FTG Mode via CPU only) If applicable, IP/network settings must be completed in

the IP Environment Menu before a TV is configured for FTG Mode (see page 45 for further

information—the default network setting is DHCP). If IP/network requirements change after

a TV has been configured for FTG Mode, the TV will need to be reset to Pass-through Mode

before the settings can be modified (see Reference section, “Resetting Factory Defaults on

the TV(s),” for further information).

FTG Mode via CPU
This mode provides the following features:
• Logical channels mapped to either RF or IP delivered

content.

•  Digital RF channel minor (program) numbers up to 999.
•  FTG Channel Map of up to 600 logical channels.
•  Start Channel set for RF, Aux input, or IP delivered content.
•  Pro:Centric data delivery over RF or IP.
FTG Mode via CPU requires LG FTG File Manager PC

software to create an FTG Configuration (.tlx) file. In this

mode, the CPU is the owner of the FTG Channel Map and

must be configured with an FTG Channel Map and FTG

Installer Menu settings using one of the following processes:
• Local: Configure an individual LD660H/LD665H/LV555H

TV via its USB port using an FTG Configuration (.tlx)

file on a USB memory device. The “Teach to TV (TLX)”

process, along with associated procedures, is described

on pages 35 to 39.

• Remote: Configure all LD660H/LD665H/LV555H TVs at

the site using a Pro:Centric server head end device

(Example: PCS150R). Load an FTG Configuration (.tlx)

file on the Pro:Centric server using the TV E-Z Installation

“Configuration” option in the Pro:Centric Server Admin

Client. Refer to the Pro:Centric™ Server Admin Client

User Guide for further information.

FTG Mode via EBL
This mode provides the following features:
•  Logical channels mapped to RF delivered content.
•  Digital RF channel minor (program) numbers up to 255.
•  FTG Channel Map of up to 141 logical channels.
•  Start Channel set for RF or Aux input delivered content.
•  Pro:Centric data delivery over RF.
FTG Mode via EBL requires LG FTG Device Configuration

Application PC software to create an FMA Configuration

(.fma) file. In this mode, the EBL is the owner of the FTG

Channel Map and must be configured with an FTG Chan-

nel Map and FTG Installer Menu settings using one of the

following processes:
• Local: Configure an individual LD660H/LD665H/LV555H

TV’s EBL via its TV-LINK CFG jack using a direct PC-to-

TV connection and the FTG Device Configuration Appli-

cation. The “Write” process for an FTG Channel Map and

FTG Installer Menu settings is described on page 40.

• Remote: Configure all LD660H/LD665H/LV555H TV EBLs

at the site using a Free-To-Guest Management Appliance

(FMA) head end device (Example: FMA-LG101). Refer

to the Free-To-Guest (FTG) Configuration Application

manual and/or the Installation & Setup manual for the

FMA device for further information.

FTG Mode of Operation Overview

FTG Mode via CPU or EBL

FTG Mode enables Pro:Idiom decryption and also allows logical channel mapping of physical channels.
As indicated in the introduction to this document, there are two separate and distinct methods for configuring

LD660H/LD665H and LV555H TVs for FTG Mode of operation: one (new) method is to configure the TV

CPU for FTG Mode operation, while the other is to configure the TV EBL for FTG Mode operation. FROM A

LOCAL CONFIGURATION STANDPOINT, EACH OF THESE METHODS IS MUTUALLY EXCLUSIVE. IF

THE CPU IS IN FTG MODE, THE EBL CANNOT BE SWITCHED TO FTG MODE. LIKEWISE, IF THE EBL

IS IN FTG MODE, THE CPU CANNOT BE SWITCHED TO FTG MODE.