LG BP350 Manuale Proprietario

3 

System Setting

19

S

ys

tem Se

tting

When you turn on the unit for the first time, the 
initial setup wizard appears on the screen. Set the 
display language and network settings on the initial 
setup wizard.
1. Press 1 (POWER). 

The initial setup wizard appears on the screen.

2. Use w/s/a/d to select a display language 

and press ENTER (b).

3.  After checking the Terms of Sevice, select 

[Agree] to use the Premium Service and SW 
Updates.  
Read and prepare the preparations for the 
network settings and then press ENTER (b) 

while [Start] is highlighted.

4.  All available networks are displayed on the 

screen. Use w/s to select a desired SSID of 

wireless network and press ENTER (b).

If you have security on your access point, you 
need to input the security code as necessary.

5. Use w/s/a/d to select the IP mode 

between [Dynamic] and [Static]. 
Normally, select [Dynamic] to allocate an IP 
address automatically.

6.  Select [Next] and press ENTER (b) to apply 

network settings. Network connection status is 
displayed on the screen. For details on network 
settings, refer to “Connecting to your Home 
Network” on page 15.

7.   Check all the settings that you have set in the 

previous steps.

Press ENTER (b) while [Finish] is highlighted 

to finish the initial setup settings. If there is any 
settings to be changed, use w/s/a/d to 

select 1 and press ENTER (b).

8.  Displays the guide to enjoy online contents 

using LG AV Remote. Press ENTER (b).