LG CM8350 Guida Utente

Pagina di 4
Specification
ENGLISH
Power Requirements
Refer to the main label on the unit.
Power Consumption
Refer to the main label on the unit.
Networked standby : 0.4 W (If all network ports are activated.)
Bus Power Supply (USB)
5 V  0 500 mA
Amplifier Total Output
2000 W
Design and specifications are subject to change without notice.
How to disconnect the wireless network connection or the wireless device
Turn off the unit by pressing the power button for more than 5 seconds.
Additional Information 
•  The USB function of this unit does not support all USB devices.  
•  Using NTFS file system is not supported. (Only FAT(16/ 32) file system is supported.)
•  External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
•  The DTS is not supported. In case of DTS audio format, audio is not output.
,
Music File Requirement
Sampling frequency
 
y MP3 : 32 kHz - 48 kHz
 
y WMA : 32 kHz - 48 kHz
Bit rate
 
y MP3 : 32 - 320 kbps
 
y WMA  : 40 - 192 kbps
Maximum files
Data CD : 999 / USB : 2000 
Maximum folders
Data CD : 99 / USB : 200 
File extensions
 
y “.mp3” 
 
y “.wma” 
CD-ROM file format
ISO9660+JOLIET   
USB Flash Drive
Devices that support USB2.0 or USB1.1.
Bluetooth
Codec   
SBC
Safety Information
LG Sound Sync
a
b
Set up the sound output of your TV : TV setting menu 
[ [Sound] [ [TV Sound output] [ [LG Sound Sync 
(Wireless)] 
Select LG TV function. 
LG Sound Sync enables you to control some functions of this unit by a remote control of your LG TV. Controllable functions 
are volume up/down and mute. Make sure that your TV has LG Sound Sync logo as shown above. 
TV Speaker
External Speaker
LG Sound Sync (Optical)
LG Sound Sync (Wireless)
For specific information of operating, refer to the instruction manual of your TV. 
When the connections failed, make sure of the conditions of this unit and your TV : power, function.  
 The amount of time to turn off this unit is different depending on your TV.
,
LG TV
PAIRED
LG TV
How to affix the Ferrite Core
Ferrite core may not be provided depending on each nation’s regulations. 
a
Pull the stopper [a] of the ferrite core to open.  
b
Wind the power cord around the ferrite core twice (Once for 110 V cord).  
Wind the SPEAKERS cables around the ferrite core once.
c
Close the ferrite core until it clicks.  
CAUTION
RISK OF ELECTRIC SHOCK  
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT 
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead 
symbol within an equilateral triangle 
is intended to alert the user to the 
presence of uninsulated dangerous 
voltage within the product’s enclosure 
that may be of sufficient magnitude 
to constitute a risk of electric shock to 
persons. 
The exclamation point within an 
equilateral triangle is intended to 
alert the user to the presence of 
important operating and maintenance 
(servicing) instructions in the literature 
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO 
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such 
as a book case or similar unit.
CAUTION: The apparatus shall not be exposed to water (dripping 
or splashing) and no objects filled with liquids, such as vases, shall 
be placed on the apparatus.
CAUTION: Do not use high voltage products around this product. 
(ex. Electrical swatter) This product may malfunction due to 
electrical shock.
CAUTION: Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions. 
Slots and openings in the cabinet are provided for ventilation and 
to ensure reliable operation of the product and to protect it from 
over heating. The openings shall be never be blocked by placing 
the product on a bed, sofa, rug or other similar surface. This product 
shall not be placed in a built-in installation such as a bookcase or 
rack unless proper ventilation is provided or the manufacturer’s 
instruction has been adhered to.
CAUTION: This product employs a Laser System.To ensure 
proper use of this product, please read this owner’s manual 
carefully and retain it for future reference. Shall the unit 
require maintenance, contact an authorized service center. 
Use of controls, adjustments or the performance of 
procedures other than those specified herein may result in 
hazardous radiation exposure. 
To prevent direct exposure to laser beam, do not try to 
open the enclosure.
CAUTION concerning the Power cord
The Power Plug is the disconnecting device. In case of an 
emergency, the Power Plug must remain readily accessible.
This device is equipped with a portable battery or accumulator. 
Safety way to remove the battery or the battery from the 
equipment: Remove the old battery or battery pack, follow the 
steps in reverse order than the assembly. To prevent contamination 
of the environment and bring on possible threat to human 
and animal health, the old battery or the battery put it in the 
appropriate container at designated collection points. Do not 
dispose of batteries or battery together with other waste. It is 
recommended that you use local, free reimbursement systems 
batteries and accumulators. The battery shall not be exposed to 
excessive heat such as sunshine, fire or the like.
RF Radiation Exposure Statement
This equipment should be installed and operated with minimum 
distance 20 cm between the radiator and your body.
 
y The appliance is not intended for use by young children or 
infirm persons without supervision.
 
y Young Children should be supervised to ensure that they do 
not play with appliance.
 
y If the appliance is supplied from a cord extension set or an 
electrical portable outlet device, the cord extension set on 
electrical portable outlet device must be positioned so that it 
is not subject to splashing or ingress of moisture.
Auto Power On  
This unit automatically turns on by an input source :  LG TV or Bluetooth
If you have already paired with this unit, automatically this unit can turn on by an input source when this unit is turned off.  
Auto Function Change  
This unit recognizes input signals such as Bluetooth and LG TV and then changes suitable function automatically.  
HELLO
CM8350-FB.DAUSLLK_MFL68899706_SIM_2.indd   2
2015-02-09     5:25:28