Sony MDR-10RBT Manuale

MDR-10RBT

Wireless  

Stereo Headset
Casque  

stéréo sans fil
Auriculares estéreo 

inalámbricos

Reference Guide

US

Guide de référence

FR

Guía de referencia

ES

ˎ

ˎ

Microwaves emitting from a BlUETooTH device may 

affect the operation of electronic medical devices. Turn 

off this unit and other BlUETooTH devices in the 

following locations, as it may cause an accident:

ˎ

ē

where inflammable gas is present, in a hospital, train, 

airplane, or a petrol station

ˎ

ē

near automatic doors or a fire alarm

ˎ

ˎ

This unit supports security capabilities that comply with 

the BlUETooTH standard to provide a secure connection 

when the BlUETooTH wireless technology is used, but 

security may not be enough depending on the setting. 

Be careful when communicating using BlUETooTH 

wireless technology.

ˎ

ˎ

We do not take any responsibility for the leakage of 

information during BlUETooTH communication.

ˎ

ˎ

Connection with all BlUETooTH devices cannot be 

guaranteed.

ˎ

ē

A device featuring BlUETooTH function is required to 

conform to the BlUETooTH standard specified by 

Bluetooth SIG, Inc. and be authenticated.

ˎ

ē

Even if the connected device conforms to the above 

mentioned BlUETooTH standard, some devices may 

not be connected or work correctly, depending on the 

features or specifications of the device.

ˎ

ē

While talking on the phone hands free, noise may occur, 

depending on the device or communication environment.

ˎ

ˎ

Depending on the device to be connected, it may require 

some time to start communication.

ˎ

ˎ

Reset the unit. 

Insert a small pin, etc., into the hole, and push it until 

you feel a click. Pairing information is not deleted.

ˎ

ˎ

If you are still unable to operate the unit even after the 

resetting operation above, initialize the unit as follows. 

Turn off the unit by pressing the PoWER button for more 

than 2 seconds. Then, press and hold the PoWER button 

and the 

/

 button together for about 7 seconds. 

The indicator (blue) flashes 4 times, and the unit is reset 

to the factory settings. All pairing information is deleted.

ˎ

ˎ

This unit can be charged using USB only. Personal 

computer with USB port, or USB Charging AC Power 

Adaptor AC-UD11 (sold separately) is required for 

charging.

ˎ

ˎ

This unit cannot connect via BlUETooTH while charging.

ˎ

ˎ

Static electricity accumulated in the body may cause 

mild tingling in your ears. To minimise the effect, wear 

clothes made from natural materials.

ˎ

ˎ

Do not place this unit in a place exposed to humidity, 

dust, soot or steam, subject to direct sunlight, or in a car 

waiting at a traffic signal. It may cause a malfunction.

ˎ

ˎ

Using the BlUETooTH device may not function on 

mobile phones, depending on radio wave conditions 

and location where the equipment is being used.

ˎ

ˎ

If you experience discomfort after using the BlUETooTH 

device, stop using the BlUETooTH device immediately. 

Should any problem persist, consult your nearest Sony 

dealer.

ˎ

ˎ

listening with this unit at high volume may affect your 

hearing. For traffic safety, do not use this unit while 

driving or cycling.

ˎ

ˎ

Do not put weight or pressure on this unit as it may 

cause the unit to deform during long storage.

ˎ

ˎ

Do not subject the unit to excessive shock.

ˎ

ˎ

Clean the unit with a soft dry cloth.

ˎ

ˎ

Do not expose the unit to water. The unit is not 

waterproof. 

Remember to follow the precautions below.

ˎ

ē

Be careful not to drop the unit into a sink or other 

container filled with water.

ˎ

ē

Do not use the unit in humid locations or bad weather, 

such as in the rain or snow.

ˎ

ē

Do not get the unit wet. 

If you touch the unit with wet hands, or put the unit in 

a damp article of clothing, the unit may get wet and 

this may cause a malfunction of the unit.

ˎ

ˎ

The earpads may deteriorate due to longterm storage or 

use.

ˎ

ˎ

If you have any questions or problems concerning this 

unit that are not covered in this manual, please consult 

your nearest Sony dealer.

Communication System
BlUETooTH Specification version 3.0

Output
BlUETooTH Specification Power Class 2

Maximum communication range
line of sight approx. 10 m (30 ft)

1)

Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)

Modulation method
FHSS

A2DP (Advanced Audio Distribution Profile)

AVRCP (Audio Video Remote Control Profile)

HFP (Hands-free Profile)

HSP (Headset Profile)

SBC

4)

, AAC

5)

, aptX

Supported content protection method
SCMS-T

transmission range (A2DP) 
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)

Included items
Wireless stereo headset (1)

micro-USB cable (approx. 50 cm (1.64 ft)) (1)

Connecting Cord (approx. 1.2 m (3.94 ft)) (1)

Carrying pouch (1)

Reference Guide (this sheet) (1)

Quick Start Guide (1)

other documents (1 set)

Recommended accessory
USB Charging AC Power Adaptor: AC-UD11 (sold separately)

1) 

The actual range will vary depending on factors such as 

obstacles between devices, magnetic fields around a 

microwave oven, static electricity, reception sensitivity, 

antenna’s performance, operating system, software 

application, etc.

2) 

BlUETooTH standard profiles indicate the purpose of 

BlUETooTH communication between devices.

3) 

Codec: Audio signal compression and conversion format

4) 

Subband Codec

5) 

Advanced Audio Coding

English

This device complies with Part 15 of the FCC Rules. 

operation is subject to the following two conditions: (1) this 

device may not cause harmful interference, and (2) this 

device must accept any interference received, including 

interference that may cause undesired operation.

You are cautioned that any changes or modifications 

not expressly approved in this manual could void your 

authority to operate this equipment.

This equipment must not be co-located or operated in 

conjunction with any other antenna or transmitter.

Note
This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful 

interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that 

interference will not occur in a particular installation. If 

this equipment does cause harmful interference to 

radio or television reception, which can be determined 

by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or 

more of the following measures:

ˎ

ē

Reorient or relocate the receiving antenna.

ˎ

ē

Increase the separation between the equipment and 

receiver.

ˎ

ē

Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

ˎ

ē

Consult the dealer or an experienced radio/TV 

technician for help.

This device complies with Industry Canada licence-exempt 

RSS standard(s). operation is subject to the following two 

conditions: (1) this device may not cause interference, and 

(2) this device must accept any interference, including 

interference that may cause undesired operation of the 

device.

This equipment complies with FCC/IC radiation exposure 

limits set forth for an uncontrolled environment and meets 

the FCC radio frequency (RF) Exposure Guidelines in 

Supplement C to oET65 and RSS-102 of the IC radio 

frequency (RF) Exposure rules. This equipment has very 

low levels of RF energy that are deemed to comply 

without testing of specific absorption ratio (SAR).

The BlUETooTH word mark and logos are owned by the 

Bluetooth SIG, Inc. and any use of such marks by Sony 

Corporation is under license.

The N Mark is a trademark or registered trademark of NFC 

Forum, Inc. in the United States and in other countries.

Microsoft, Windows and Windows Vista are registered 

trademarks or trademarks of Microsoft Corporation in the 

United States and/or other countries.

Macintosh and Mac oS are trademarks of Apple Inc., 

registered in the U.S. and other countries. 

The aptX

®

 mark and the aptX logo are trade marks of CSR 

plc or one of its group companies and may be registered 

in one or more jurisdictions.

other trademarks and trade names are those of their 

respective owners.

ˎ

ˎ

BlUETooTH wireless technology operates within a range 

of about 10 meters (30 feet).  

Maximum communication range may vary depending on 

obstacles (human body, metal, wall, etc.) or 

electromagnetic environment.

ˎ

ˎ

The antenna is built into the unit as illustrated in the 

dotted line. The sensitivity of the BlUETooTH 

communication will improve by turning the direction of 

the built-in antenna to the connected BlUETooTH 

device. 

The communication distance shortens when the 

obstacles are between the antenna of the connected 

device and this unit.

Location of 

built-in 

antenna

ˎ

ˎ

The following conditions may affect the sensitivity of 

BlUETooTH communication.

ˎ

ē

There is an obstacle such as a human body, metal, or 

wall between this unit and BlUETooTH device.

ˎ

ē

A device using 2.4 GHz frequency, such as a wireless 

lAN device, cordless telephone, or microwave oven, is 

in use near this unit.

ˎ

ˎ

Because BlUETooTH devices and wireless lAN 

(IEEE802.11b/g) use the same frequency, microwave 

interference may occur and resulting in communication 

speed deterioration, noise, or invalid connection if this 

unit is used near a wireless lAN device. In such a case, 

perform the following.

ˎ

ē

Use this unit at least 10 m (30 ft) away from the 

wireless lAN device.

ˎ

ē

If this unit is used within 10 m (30 ft) of a wireless lAN 

device, turn off the wireless lAN device.

ˎ

ē

Install this unit and BlUETooTH device as near to each 

other as possible.

©2013  Sony Corporation  Printed in China

Power source
DC 3.7 V: Built-in lithium-ion rechargeable battery

DC 5 V: When charged using USB

Mass
Approx. 210 g (7.41 oz)

Operating temperature
0 °C to 40 °C (32 °F to 104 °F)

usage hours
Music playback time: Max. 17 hours

Communication time: Max. 17 hours

Standby time: Max. 450 hours

Charging time
Approx. 2.5 hours

Charging temperature
5 °C to 35 °C (41 °F to 95 °F)

type
Closed, Dynamic

Driver units
40 mm

Frequency response
5 Hz - 40 kHz (when using the supplied connecting cord)

Maximum input
1,000 mW (when using the supplied connecting cord)

Impedance
40 Ω (1 kHz) (when using the supplied connecting cord)

Sound pressure sensitivity
100 dB/mW (when using the supplied connecting cord)

type
Electret condenser

Direction characteristic
omni directional

effective frequency range
100 Hz – 4,000 Hz

Personal Computer with pre-installed with any of the 

following operating systems and USB port: 

Operating Systems
(when using Windows)

Windows

®

 8 / Windows

®

 8 Pro

Windows

®

 7

Home Basic / Home Premium / Professional / Ultimate

Windows Vista

®

 (Service Pack 2 or later)

Home Basic / Home Premium / Business / Ultimate

Windows

®

 XP (Service Pack 3 or later)

Home Edition / Professional / Media Center Edition 2004 / 

Media Center Edition 2005

(when using Macintosh)

Mac oS X (version.10.3 or later)

Design and specifications are subject to change without notice.

Français

le présent appareil est conforme aux CNR d’Industrie 

Canada applicable aux appareils radio exempts de licence. 

l’exploitation est autorisée aux deux conditions suivantes : 

(1) l’appareil ne doit pas produire de brouillage, et (2) 

l’utilisateur de l’appareil doit accepter tout brouillage 

radioélectrique subi, même si le brouillage est susceptible 

d’en compromettre le fonctionnement.

Cet équipement est conforme aux limites d’exposition aux 

rayonnements énoncées pour un environnement non 

contrôlé et respecte les règles les radioélectriques (RF) de 

la FCC lignes directrices d’exposition dans le Supplément C 

à oET65 et d’exposition aux fréquences radioélectriques 

(RF) CNR-102 de l’IC. Cet équipement émet une énergie RF 

très faible qui est considérée conforme sans évaluation du 

débit d’absorption spécifique (DAS).

la marque de mot BlUETooTH et les logos sont la 

propriété de Bluetooth SIG, Inc. et l’utilisation de ces 

marques par Sony Corporation est effectuée sous licence.

N Mark est une marque commerciale ou une marque déposée 

de NFC Forum, Inc. aux États-Unis et dans d’autres pays.

Microsoft, Windows et Windows Vista sont des marques 

déposées ou des marques de commerce de Microsoft 

Corporation aux États-Unis et/ou dans les autres pays.

Macintosh et Mac oS sont des marques de commerce de 

Apple Inc., déposées aux États-Unis et dans d’autres pays.

la marque aptX

®

 et le logo aptX sont des marques 

commerciales de CSR plc ou d’une des sociétés de son 

groupe, et ils peuvent être déposés dans une ou plusieurs 

juridictions.

les autres marques commerciales et noms commerciaux 

appartiennent à leurs propriétaires respectifs.

ˎ

ˎ

la technologie BlUETooTH sans fil fonctionne dans un 

rayon d’environ 10 mètres (30 pieds).  

la portée de communication maximale peut varier en 

fonction des obstacles (personnes, éléments métalliques, 

murs, etc.) ou de l’environnement électromagnétique.

ˎ

ˎ

l’illustration ci-dessous indique l’emplacement de l’antenne 

intégrée sur l’appareil. la sensibilité de la communication 

BlUETooTH pourra être améliorée en modifiant l’orientation 

de l’antenne intégrée du périphérique BlUETooTH. 

la distance de communication est réduite en cas 

d’obstacles présents entre l’antenne du périphérique 

connecté et cet appareil.

Emplacement 

de l’antenne 

intégrée

4-477-580-

12(1)