Olympus µ 795SW Manuale Utente

Me
nu opera

tions

EN

 23

[e SHOOT & SELECT1]/[f SHOOT & SELECT2]

• These scene modes allow you to take sequential pictures by holding down the shutter 

button. After shooting the pictures, select the ones you want to erase by marking them with 
a R and press 

f/S to erase them.

You can take a sequence of pictures at one time by holding down the shutter button. The 
camera will take pictures continuously until you release the shutter button.

AUTO

The white balance is adjusted automatically for natural color, 
regardless of the light source.

5

Sunny day

For shooting under a clear sky.

3

Cloudy day

For shooting under a cloudy sky.

1

Tungsten light For shooting under tungsten lighting.

w

Fluorescent 
lamp 1

For shooting under daylight fluorescent lighting. (This type of lamp is 
mainly used in homes.)

x

Fluorescent 
lamp 2

For shooting under a neutral white fluorescent lamp. (This type of 
lamp is mainly used in desk lamps.)

y

Fluorescent 
lamp 3

For shooting under a white fluorescent lamp. (This type of lamp is 
mainly used in offices.)

AUTO

Sensitivity is automatically adjusted according to the conditions of the 
subject.

80/100/200/400/
800/1600

A low value lowers the sensitivity for daylight shooting of clear, sharp 
pictures. The higher the value, the better the camera’s light sensitivity and 
ability to shoot with a fast shutter speed and in low light conditions. 
However, high sensitivity introduces noise into the resulting picture, which 
may give it a grainy appearance.

o

Shoots 1 frame at a time when the shutter button is pressed.

j

Focus and exposure are locked at the first frame. The sequential shooting 
speed varies depending on the image quality setting.

W

Pictures can be taken at a faster speed than normal sequential shooting.

Selected picture.

e

e

S

Press 

43 to scroll through the pictures.

Pictures with a R mark are erased.

Press 

o to set or cancel the R mark on the picture. 

4