Olympus µ 795SW Manuale Utente

56 

EN

Get

ting t

o

 k

now 

your camera bet

te

r

Movie

• If you use a non-Olympus card or a card that was used on a computer for another 

application, use the [FORMAT] function to format the card.

g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card” (P. 32)

This camera uses several lamps to indicate the camera status.

• Performing any of the following operations when not actually taking pictures can deplete the 

battery power.

• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom

• To minimize the battery consumption, set [POWER SAVE] to [ON] and turn off the camera 

whenever it is not in use.

g “POWER SAVE Setting the camera to the power save mode” (P. 37)

• Some items may not be selectable from the menus when using the arrow pad.

• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:

[

%], Flash Mode, etc.

• Items used to edit pictures taken with another camera.

• Some functions cannot be used when there is no card in the camera.

[PANORAMA], [PRINT ORDER], [FORMAT], [BACKUP]

Image quality

Image size

Continuous recording length

Internal memory

Using a 1 GB card

SHQ

640 × 480

(30 frames/sec.)

8 sec.

10 sec.

HQ

320 × 240

(15 frames/sec.)

38 sec.

29 min.

SQ

160 × 120

(15 frames/sec.)

1 min. 34 sec.

29 min.

Lamp

Status

Self-timer lamp

The lamp lights for approximately 10 seconds, blinks for approximately 
2 seconds, and then the picture is taken.

Card access lamp

Blinking: An image or movie is being recorded or downloaded (when 
connected to a computer).
• Do not do any of the following while the card access lamp is blinking. 

Doing so may prevent the image data from being saved and render 
the internal memory or card unusable.

• Open the battery/card compartment cover.
• Remove the battery and card.
• Connect or disconnect the AC adapter.

Green lamp of the monitor Lit: The focus and exposure are locked.

Blinking: The focus is not locked.
• Release your finger from the shutter button, re-position the AF target 

mark on the subject and press the shutter button halfway again.